£10.82 VAT excl.
BT-2550SV Vertical
Drain Valve 3/8"BSP. Fitted to bottom of air receiver in order to drain condensate out of the... read more
£12.99
Burisch X4550 Sealant Adhesive Compound 25ml bottle for assembling air compressor fittings,... read more
£10.99
£9.16 VAT excl.
spares
NRV Check Valve Brass 1/2" x 1/2" horizontal mount
Product code: BS0021
Availability: In stock
NRV Check Valve Brass 1/2"BSP. One way valve that allows air into the air receiver but prevents... read more
£24.99
£20.82 VAT excl.
spares
Motor Capacitor 40uF, Twin spade terminal, Threaded
Product code: BS0086
Availability: In stock
Motor Capacitor 40uF. Supplies a steady current to electric induction motors. Rated at 40uF. Not... read more
£15.99
£13.32 VAT excl.
spares
Wheel axle complete - various sizes
Product code: BS-AXLE
Availability:
Product available with different options
Wheel axle complete, including axle, nut, washers. Various axle lengths below, Diameter 12.7mm.... read more
£3.59
£2.99 VAT excl.
Aluminium unloader pipe which connects between the unloader valve of the pressure switch and the... read more
£10.79
£8.99 VAT excl.
Oil Vent Cap Plastic - Push fit type - suitable for 18mm hole. Fitted with 2 x rubber o-rings. read more
£4.79
£3.99 VAT excl.
Rubber stopper foot bolt-through type to suit M8 bolt. Height 29mm. 53mm diameter. read more
£4.99
£4.16 VAT excl.
Cast iron cylinder to suit 55mm piston. Total height 74mm. read more
£23.99
£19.99 VAT excl.
Piston cast aluminium, for type S pumps. 54.7mm diameter. 40mm Height. To fit 12mm gudgeon pin.... read more
£13.49
£11.24 VAT excl.
Plastic cooling fan - To suit type S pumps. 150mm diameter. To suit shaft diameter of 13.8mm (3/4... read more
£10.79
£8.99 VAT excl.
Sump cover gasket rubber, to fit Type S pump models. read more
£9.59
£7.99 VAT excl.
spares
Air Delivery pipe / Charge Pipe - Type S (Vertical receiver)
Product code: BS0066
Availability: In stock
Air Delivery pipe / Charge Pipe - Type S - suitable for compressors with vertical air receiver.... read more
£14.99
£12.49 VAT excl.
Fascia Plate Gauge surround. 232mm x 140mm. 2 x 43mm hole, 1 x 40mm hole, 2 x 25mm hole. Black... read more
£10.79
£8.99 VAT excl.
Cover housing shroud Plastic, to fit Type S pump/motor units. read more
£29.99
£24.99 VAT excl.
Cylinder head cast aluminium - Type S. Suitable for S type pumps. read more
£17.99
£14.99 VAT excl.
spares
Steel air compressor handle (Red) 255mm x 22mm diameter
Product code: BS0093
Availability: In stock
Steel air compressor handle (Red). To suit air compressors with S Pump on vertical 50L air... read more
£14.99
£12.49 VAT excl.
spares
Valve retainer pin 2.95mm diameter x 6mm length VT / S
Product code: BS0105
Availability: In stock
Valve retainer pin 2.95mm diameter x 6mm length. Holds the reed valve in place to the cylinder on... read more
£0.79
£0.66 VAT excl.
Reed valve - Type S - 65mm x 20mm x 0.3mm. To suit S type pumps. Sold each. 1 Required read more
£10.79
£8.99 VAT excl.
Rubber foot mounting hardware M8 x 30mm, supplied with 1 x bolt, 1 x nut, 2 x washer. Zinc plated... read more
£1.79
£1.49 VAT excl.
spares
Gudgeon pin 11.95mm diameter x 46mm length - Type S
Product code: BS0111
Availability: In stock
Gudgeon pin 11.95mm diameter x 46mm length. To fit type S pump units. 1 required. read more
£10.79
£8.99 VAT excl.
Cylinder base gasket for S type pump units. 4 x 9mm holes measuring 48mm and 71mm centre to centre. read more
£7.19
£5.99 VAT excl.
Lower valve plate gasket for S type pumps. 90mm x 70mm read more
£5.79
£4.83 VAT excl.
Oil control ring. For S pumps with 54.7mm piston (sold each, 1 required) read more
£9.59
£7.99 VAT excl.