£29.16 VAT excl.
BT-3100V Direct Drive
Cast Regulator Manifold 6 port - 3 x 1/4"BSP (Female), 2 x 1/8" BSP (Female), 1 x 1/4"BSP (Male),... read more
£34.99
spares
NRV Check Valve Brass 1/2" x 3/8" horizontal mount
Product code: BS0020
Availability: In stock
NRV Check Valve Brass 1/2"BSP. One way valve that allows air into the air receiver but prevents... read more
£24.99
£20.82 VAT excl.
Drain Valve 3/8"BSP. Fitted to bottom of air receiver in order to drain condensate out of the... read more
£12.99
£10.82 VAT excl.
Burisch X4550 Sealant Adhesive Compound 25ml bottle for assembling air compressor fittings,... read more
£10.99
£9.16 VAT excl.
spares
Air Pressure Control Switch - 1 inlet port 1/4" BSP
Product code: BS0037
Availability: In stock
Air Pressure Control Switch - Single inlet port @ 1/4" BSP. Zero outlet ports. Adjustable. 15A... read more
£29.99
£24.99 VAT excl.
Cylinder head Elbow / Tee Fitting set (3pc). Connects to cylinder heads compression side enabling... read more
£19.99
£16.66 VAT excl.
Connecting Rod. Conrod made from cast aluminium. Measurements: 12mm Gudgeon, 23mm Crank, 93mm... read more
£12.99
£10.82 VAT excl.
spares
Wheel axle complete - various sizes
Product code: BS-AXLE
Availability:
Product available with different options
Wheel axle complete, including axle, nut, washers. Various axle lengths below, Diameter 12.7mm.... read more
£3.59
£2.99 VAT excl.
spares
Common cylinder head connection pipe (Aluminium) 3/8" - Type VT
Product code: BS0043
Availability: In stock
Common cylinder head connection pipe (Aluminium). 3/8" BSP Flare nuts fitted to both ends. read more
£9.59
£7.99 VAT excl.
Crankshaft (Cast Iron) for V-Twin pump. To suit 20mm (nominal) motor shaft, and 23mm conrods. read more
£18.99
£15.82 VAT excl.
Rubber stopper foot bolt-through type to suit M8 bolt. Height 29mm. 53mm diameter. read more
£4.99
£4.16 VAT excl.
Piston cast aluminium, for V-Twin pumps. 47.8mm diameter. 35mm Height. To fit 11.90mm gudgeon... read more
£13.49
£11.24 VAT excl.
Sump cover gasket rubber, to fit V-Twin pump models. read more
£9.59
£7.99 VAT excl.
Cast iron cylinder to suit 47.80mm piston. Total height 70mm. For V-Twin pumps read more
£23.99
£19.99 VAT excl.
Air Delivery pipe / Charge Pipe. Aluminium construction. Flare nuts fitted. read more
£14.99
£12.49 VAT excl.
spares
Oil level window sight glass 1/2" BSP with seal
Product code: BS0100
Availability:
Out-of-Stock
Oil level window sight glass 1/2" BSP with seal. To fit all pumps with 1/2" BSP thread read more
£6.99
£5.83 VAT excl.
spares
Oil control ring - Type VT - for 47.8mm piston EACH
Product code: BS0103
Availability: In stock
Oil control ring. For V-Twin pumps with 47.8mm piston (sold each, 1 required per piston) read more
£3.99
£3.33 VAT excl.
Compression ring. For V-Twin pumps with 47.8mm piston (sold each, 4 required) read more
£3.99
£3.33 VAT excl.
spares
Valve retainer pin 2.95mm diameter x 6mm length VT / S
Product code: BS0105
Availability: In stock
Valve retainer pin 2.95mm diameter x 6mm length. Holds the reed valve in place to the cylinder on... read more
£0.79
£0.66 VAT excl.
Reed valve - Type VT - 57mm x 20mm x 0.3mm. To suit V-Twin type pumps. Sold EACH. 1 required per... read more
£9.59
£7.99 VAT excl.
spares
Inspection blanking plug 1/2" BSP steel + rubber seal
Product code: BS0109
Availability:
Out-of-Stock
Blanking plug 1/2" BSP. Cadmium coated steel. Includes rubber seal. Used to blank off the ends of... read more
£5.99
£4.99 VAT excl.
Rubber foot mounting hardware M8 x 30mm, supplied with 1 x bolt, 1 x nut, 2 x washer. Zinc plated... read more
£1.79
£1.49 VAT excl.
spares
Gudgeon pin 11.95mm diameter x 40mm length - Type VT
Product code: BS0112
Availability: In stock
Gudgeon pin 11.95mm diameter x 40mm length. To fit type VT pump units. 2 required. read more
£8.39
£6.99 VAT excl.
Handle retainer Grub screw M8 X 6mm. Screws into handle mounts on compressor receiver to hold the... read more
£1.19
£0.99 VAT excl.