£38.31 VAT excl.
BT-390T Belt Drive
Complete spares kit for BS3800 includes everything needed for a top end rebuild, oil change, air... read more
£45.98
£65.68
3HP 2.2KW Electric Induction Motor. 3,000RPM, IP44, twin capacitor (start/run). 13A. Rating class... read more
£169.99
£141.66 VAT excl.
Drain Valve 3/8"BSP. Fitted to bottom of air receiver in order to drain condensate out of the... read more
£12.99
£10.82 VAT excl.
Regulator Manifold 4 port. 3 x 1/4"BSP, 1 x 1/8"BSP. Allows control of outlet pressure to 2 ports... read more
£24.99
£20.82 VAT excl.
Rubber pulley drive belt for connecting electric motor to air pump. 122cm outside circumference.... read more
£24.99
£20.82 VAT excl.
Burisch X4550 Sealant Adhesive Compound 25ml bottle for assembling air compressor fittings,... read more
£10.99
£9.16 VAT excl.
Air filter and plastic housing suitable for BS3800. Mounting bolts not included. read more
£21.99
£18.32 VAT excl.
Motor Starting Capacitor 300uF. Supplies a large current to electric induction motors to aiding... read more
£21.99
£18.32 VAT excl.
Motor Run Capacitor 60uF. Supplies a steady current to electric induction motors. Rated at 60uF.... read more
£19.99
£16.66 VAT excl.
10BAR 145PSI Safety Valve 1/4" BSP. Relieves pressure from air vessel should it exceed the... read more
£19.99
£16.66 VAT excl.
Head Gasket for BS3800 pump. Fits to bottom of cylinder head to provide a seal in the compression... read more
£13.99
£11.66 VAT excl.
Upper Cylinder Gasket BS3800, 86mm x 155mm. See images for full technical diagram with dimensions. read more
£13.99
£11.66 VAT excl.
Copper valve plate gasket for BS3800 pump. 86mm X 155mm. See images for full technical diagram... read more
£13.99
£11.66 VAT excl.
1 x Reed valve BS3800, 9.92mm (W) x 44.41mm (L) x 0.26mm (thickness). Reed valves control the air... read more
£2.49
£2.08 VAT excl.
Large Pulley wheel for pump BS3800. Attaches to crankshaft of pump unit. Rubber belt drives the... read more
£44.99
£37.49 VAT excl.
Oil Vent Cap for BS3800 pump - Threaded. Black plastic. Threads onto sump casing of compressor... read more
£6.99
£5.83 VAT excl.
Air pressure gauge. 50mm diameter. Plastic housing and lens. 1/4" BSP Threaded inlet. Readings:... read more
£8.99
£7.49 VAT excl.
90 Degree Elbow fitting 1/8" BSP M/M. Connects to check valve on certain air compressor models read more
£3.59
£2.99 VAT excl.
Bolt M8X1.25 X 30mm. Attaches air filter to cylinder head on certain air compressor models read more
£1.49
£1.24 VAT excl.
1/4" BSP Straight Coupler. Connects pressure switch to regulator manifold on certain models of... read more
£2.39
£1.99 VAT excl.
spares
Cylinder head outlet elbow threaded 1/2" x 16G Flare BS3800
Product code: BS0024
Availability: In stock
Cylinder head outlet elbow threaded 1/2" BSP x 16G (18.8mm Thread O.D) Flared. Steel, zinc plated. read more
£7.79
£6.49 VAT excl.
Connecting Rod. Conrod made from cast aluminium. Measurements: 15mm Gudgeon, 37mm Crank, 104mm... read more
£14.99
£12.49 VAT excl.
Cable compression gland suitable for 1.5mm2 3-core flex. Commonly used to seal cable entry to... read more
£2.39
£1.99 VAT excl.
spares
Wheel axle complete - various sizes
Product code: BS-AXLE
Availability:
Product available with different options
Wheel axle complete, including axle, nut, washers. Various axle lengths below, Diameter 12.7mm.... read more
£3.59
£2.99 VAT excl.