£2.99 VAT excl.
spares
90 Degree Elbow fitting 1/8" BSP M/M. Connects to check valve on certain air compressor models read more
£3.59
Bolt M8X1.25 X 30mm. Attaches air filter to cylinder head on certain air compressor models read more
£1.49
£1.24 VAT excl.
1/4" BSP Straight Coupler. Connects pressure switch to regulator manifold on certain models of... read more
£2.39
£1.99 VAT excl.
spares
Cylinder head outlet elbow threaded 1/2" x 16G Flare BS3800
Product code: BS0024
Availability: In stock
Cylinder head outlet elbow threaded 1/2" BSP x 16G (18.8mm Thread O.D) Flared. Steel, zinc plated. read more
£7.79
£6.49 VAT excl.
Connecting Rod. Conrod made from cast aluminium. Measurements: 12mm Gudgeon, 23mm Crank, 93mm... read more
£12.99
£10.82 VAT excl.
Connecting Rod. Conrod made from cast aluminium. Measurements: 15mm Gudgeon, 37mm Crank, 104mm... read more
£14.99
£12.49 VAT excl.
Cable compression gland suitable for 1.5mm2 3-core flex. Commonly used to seal cable entry to... read more
£2.39
£1.99 VAT excl.
spares
Wheel axle complete - various sizes
Product code: BS-AXLE
Availability:
Product available with different options
Wheel axle complete, including axle, nut, washers. Various axle lengths below, Diameter 12.7mm.... read more
£3.59
£2.99 VAT excl.
Cylinder base gasket. 166mm x 105mm. 8.5mm holes. To fit pump BS3800 read more
£13.99
£11.66 VAT excl.
Single steel valve plate (bare) BS3800, 86mm x 155mm. See images for full technical diagram with... read more
£9.59
£7.99 VAT excl.
spares
Air Delivery pipe / Charge Pipe - For V-Twin models
Product code: BS0041
Availability: In stock
Air Delivery pipe / Charge Pipe. Aluminium construction. Flare nuts fitted. read more
£11.99
£9.99 VAT excl.
Aluminium unloader pipe which connects between the unloader valve of the pressure switch and the... read more
£10.79
£8.99 VAT excl.
spares
Common cylinder head connection pipe (Aluminium) 3/8" - Type VT
Product code: BS0043
Availability: In stock
Common cylinder head connection pipe (Aluminium). 3/8" BSP Flare nuts fitted to both ends. read more
£9.59
£7.99 VAT excl.
Crankshaft (Cast Iron) for V-Twin pump. To suit 20mm (nominal) motor shaft, and 23mm conrods. read more
£18.99
£15.82 VAT excl.
Oil Vent Cap Plastic - Push fit type - suitable for 18mm hole. Fitted with 2 x rubber o-rings. read more
£4.79
£3.99 VAT excl.
Rubber stopper foot 22mm push fit type, height 30mm. 42mm lower diameter. read more
£4.99
£4.16 VAT excl.
Rubber stopper foot bolt-through type to suit M8 bolt. Height 29mm. 53mm diameter. read more
£4.99
£4.16 VAT excl.
Lower Sump gasket - Rubber. 12 hole. To suit BS3800 pump read more
£8.39
£6.99 VAT excl.
Cast iron cylinder to suit 55mm piston. Total height 74mm. read more
£23.99
£19.99 VAT excl.
Piston cast aluminium, for V-Twin pumps. 47.8mm diameter. 35mm Height. To fit 11.90mm gudgeon... read more
£13.49
£11.24 VAT excl.
Piston cast aluminium, for type S pumps. 54.7mm diameter. 40mm Height. To fit 12mm gudgeon pin.... read more
£13.49
£11.24 VAT excl.
Piston cast aluminium, for BS3800 pumps. 64.7mm diameter. 50mm Height. To fit 15mm gudgeon pin.... read more
£15.60
£13.00 VAT excl.
Plastic cooling fan - To suit type S pumps. 150mm diameter. To suit shaft diameter of 13.8mm (3/4... read more
£10.79
£8.99 VAT excl.
Sump cover gasket rubber, to fit V-Twin pump models. read more
£9.59
£7.99 VAT excl.